![]() ![]() For example, if I have a source drawing with a surface with a size of 200MB, when I reference that surface in to another drawing the new drawing will become 200MB larger. The downside is that the drawing will contain the weight of the surface. It is supposed to open more quickly as well but there are numerous reports of this not being the case. ![]() The benefits of this are that if the source drawing is moved the surface will still be visible because the surface has been saved in the drawing. The drawing will be smaller, but will open more slowly.Ĭhoosing Yes will save the surface in the drawing. When set to No, the reference is checked every time the drawing is opened. No: Does not save the geometry of reference surfaces in the drawing.The referenced surfaces will be visible even if the source drawings are not available. The drawing will become larger, but will open more quickly unless the source surface has changed. Yes: Saves the geometry of reference surfaces in the drawing.There are two options for setting the Store Referenced Surface in Drawing from the Autodesk Knowledge Network Expand Surface Creation and the Store Referenced Surface in Drawing settings are located there. ![]() ![]() This opens the Edit Command Setting dialog box. Scroll down until CreateReferenceSurface is found, right click and select Edit Command Settings. The setting is accessed by selecting the Settings tab of the Toolspace, expanding surface and commands. In the 2017 version Autodesk’s Civil 3D they introduced a new feature which stores the geometry of a referenced surface in a drawing when using data references. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |